Installation Guide

General Installation Guidelines for Natural Stone Wall Tiles

At Earthstona, we are committed to ensuring that your natural stone wall tiles deliver lasting beauty and performance. To achieve optimal results, please follow these expert-approved instructions:

1. Hire Qualified Professionals

• Always engage a skilled and experienced tile mason or stone contractor.
• Ensure the installation is supervised by a qualified Architect, Project Manager, or Site Supervisor.

2. Pre-Installation Checklist

• Inspect all tiles by opening multiple boxes to understand natural shade variations.
• Blend tiles from different boxes for a more natural and balanced look.
• Clean the surface thoroughly to remove all dust, grease, and contaminants.

3. Adhesives, Grouts & Sealants

• Use only manufacturer-recommended adhesives, grouts, sealers, and cleaners.
• Test a small area first to verify compatibility and color match.
• Opt for stain-resistant grout for better maintenance and aesthetics.

4. Sealing Before Grouting

• Apply one coat of high-quality stone sealer on all tiles before grouting.

5. Grouting Best Practices

• Apply grout diagonally using a firm sponge.
• Let the grout set for 10–15 minutes before gently cleaning excess.
• Ensure grout lines are recessed 3–4 mm below tile level.
• Clean grout residue immediately. Use only approved tile cleaner, never acid-based products.

Important Reminders

• Natural variations in color, texture, and veining are not defects, but part of the stone’s natural beauty.
• Using incompatible or substandard materials may compromise quality.
• If uncertain, consult a certified installer or contact Earthstona’s support team.

By following these guidelines, you ensure a successful and visually stunning natural stone installation—true to Earthstona’s promise of excellence.